|
|
|
We manufacture Phthalimide for use in Pigment Industry also for use in Phthalimide based other intermediates.
|
| |
Molecular Weight |
147 |
Physical Appearance |
White Crystalline Powder |
Purity |
99% minimum |
Melting Point |
232oC – 234oC |
Free Phthalic Acid Content |
less than 0.2% |
Ash Content (Residue) |
less than 0.1% |
Moisture |
less than 0.5% |
Packing |
25 Kg HDPE / Paper bags |
|
|
|
|
|
| |
| |
|
|
|
We produce potassium phthalimide which is extensively used in pharmaceutical industry. Its balanced composition makes it a good solvent. We also manufacture it as per the requirements of the clients. It is available in white crystalline and white powder form. Their specifications as per their forms are:
|
| |
Physical Appearance |
White Powder |
Molecular Weight |
185 |
Purity |
98% minimum |
Melting Point |
> 300oC |
Free Phthalic Acid Content |
less than 0.2% |
Turbidity 5%solution |
less than 10 NTU |
Ash Content (Residue |
less than 0.1% |
Moisture |
Not Traceble |
Packing |
25 Kg HDPE / Paper bags |
|
| |
|
It is also available in various active concentration such as 10%, 20%, 30%, 50% etc. |
|
|
| |
| |
|
|
|
Our range of chemicals also includes 3 N-Hydroxy phthalimide. They are largely used in pharmaceutical industries and other chemical based companies. It is available with the following specifications:
|
| |
Molecular Weight |
|
Molecular Formula |
|
Physical Appearance |
White Powder |
Purity |
99 % minimum |
Refractive Index |
|
Melting Point |
232 -233 0C |
Moisture |
Less than 0.5 % |
Packing |
25 Kg Paper bags ? HDPE Drums |
|
|
|
|
|
| |
| |
|
|
|
We offer Barbituric Acid, to be used in different chemical preparations. They are prepared using well researched compositions to ensure their safe and reliable performance. It is available with the following specifications:
|
| |
CAS No. |
000067 -52 -7 |
Chemical Formula |
C4H4N2O3 |
Molecular Weight |
128 |
Physical Appearance |
Off White Powder |
Purity |
99% minimum |
Melting Point |
248 – 252oC |
Ash Content |
less than 0.5% |
Moisture |
less than 0.5% |
Packing |
25 Kg HDPE / Paper bags |
|
|
|
|
|
| |
| |
|
|
|
We manufacture alloxan monohydtrate, to cater to the needs of varied pharmaceutical and chemical industries. When producing this chemical it is checked that it is not harmful to use. It is available with the following specifications:
|
| |
Molecular Weight |
160 |
Physical Appearance |
Creamish to yellowish Crystalline Powder |
Molecular Formula |
C4H2N2O4.H2O |
Purity |
98% minimum |
Melting Point |
259 - 260oC |
Ash Content (Residue) |
less than 0.1% |
Moisture |
10 – 12% as H2O |
Packing |
200 Kg HDPE drums |
|
 |
|
|
|
| |
| |
|
|
Murexide ( Ammonium Purpurate )
|
Our range of chemicals also includes Murexide (ammonium purpurate). This is used as research indicator and in special grade pigments. It is available with the following specifications:
|
| |
Molecular Weight |
284.19 |
Molecular Formula |
C8H8N606 |
Physical Appearance |
Red Purple Powder |
Purity |
97% minimum |
Wave length (ë Max) |
523 - 525 mm |
Specific extension E 1%/1CM |
575 - 580 |
Sensitivity / Suitability |
Passes Test (< 0.5 ml Of CaCl2 1mg/100 ml) |
Packing |
As required |
|
|
|
|
|
| |
| |
|
|
|
We also manufacture Chloranilic acid, with various use as research indicator and related industries. They are prepared with utmost attention to its composition. It is available with the following specifications:
|
| |
Molecular Weigh |
|
Physical Appearance |
redesh orange powder |
Melting Point |
283 -285 0C |
Absorption |
290 -340 @ 520 -555 nm |
Moisture |
Less than 0.5 % |
Ash Content |
Nil |
|
|
|
|
|
| |
| |
|
|
Tri Chloro Acetic Acid (TCA)
|
We offer tri chloro acetic acid to cater to the varied needs of our clients. These are manufactured with special attention to its composition. This helps in making the products safe and reliable to use. They are available with the following specifications:
|
| |
Specifications |
Physical Appearance |
White Crystalline Powder |
Purity |
99% Minimum |
Chlorides |
less than 20 PPM |
Moisture |
Less than 0.5% (KF) |
Residue on Ignition |
less than 0.1 |
|
|
|
|
|
| |
| |
|
|
|
We manufacture Chloramine T trihydrate for used in water purification and other related Industry. This product is available in powder or tablets for according to requirement of customers:
|
| |
CAS NO. |
7080-50-4 |
Molecular Weight |
281 |
Physical Appearance |
White Crystalline Powder/Tablets |
Purity |
98% minimum |
Melting Point |
180oC |
PH of 5% solution |
8 to 10 |
Solubility |
Soluble in water |
Solubility in Alcohol |
Maximum Insolubles are 1.5 |
Packing |
25 Kg HDPE Drums / Paper bags |
|
|
|
|
|
| |
| |
|
|
|
We also manufacture sodium lauryl sulphate for use in tooth powder/tooth paste/ shampoo/detergent and various related industries. They are prepared with utmost attention to its composition. It is available with the following specifications:
|
| |
Molecular Weight |
288 |
Molecular Formula |
C12H25NaO4S |
Physical Appearance |
White Powder |
Purity (Active Matter) |
94% minimum |
PH of 10% solution |
7.5 -9.5 at 25oC |
Chlorides |
less than 0.3% |
Sulphates |
less than 2.5% |
NDOM (Unreacted oil) |
less than 2.5% |
Moisture |
less than 1% |
Packing |
20 Kg HDPE Bags |
|
|
|
|
|
| |
| |
|
|
Silicone Based Antifoam Emulsion
|
The silicone based antifoam emulsion are available in various concentrations depending on its use. The typical available concentrations are 10%, 20%, 30%, 50% and 100%. It is widely used in rubber, petrochemicals, fertilizer, food, detergent industries and at many effluent treatment plants:
|
| |
Physical Appearance |
Translucent Gray Liquid |
Active Ingredient |
100% |
Viscosity |
> 2000 CPS |
Diluents |
Kerosene, Toluene |
Shelf Life |
9-12 Months |
Performance |
less than 15 Seconds |
Packing |
50 /100/200 Kg HDPE Drums |
|
|
|
|
|
| |
|
| |
|
